<listing id="lnbf7"></listing>
      <th id="lnbf7"></th>

      <th id="lnbf7"></th>

        <big id="lnbf7"><noframes id="lnbf7">

        <track id="lnbf7"></track>

            <video id="lnbf7"><mark id="lnbf7"><listing id="lnbf7"></listing></mark></video>

            <b id="lnbf7"><progress id="lnbf7"><noframes id="lnbf7">

            <video id="lnbf7"></video>
            <track id="lnbf7"></track>





            Copyright ?Huizhou Linghangda Technology Co., Ltd. All Rights Reserved   粵ICP備07510805號   Powered by:www.300.cn


            Provide a one-stop service from circuit board design to manufacturing.

            PCB circuit board design process analysis

            Company news
            Page view

            PCB board design needs to provide information:

            1. Schematic: A complete electronic document format that can produce a correct netlist (netlist);

            2. Mechanical size: provide the specific position and direction identification of the positioning device, and the identification of the specific height limit position area;

            3. BOM list: mainly to determine and check the specified package information of the device on the schematic;

            4. Wiring Guidelines: Descriptions of specific signal specific requirements, as well as design requirements for impedance, lamination, etc.


            The basic design flow of PCB board design is as follows:

            Pre-preparation -> PCB structure design -> PCB layout -> wiring -> wiring optimization and silk screen -> network and DRC inspection and structural inspection -> plate making.